Glass edging machine as a necessary machine for glass deep processing, the appearance is relatively large, so the price of glass edging machine is relatively high. Now, I want to share with you the details of the selection of glass edger, where to start to observe and check the quality of glass edger is reliable.
First, let's review the basic structure of a glass edger. The main engine, inlet and outlet guide rail, glass support and ground water tank are the basic components. The main machine can be divided into front beam, rear beam, base, column, motor, electric box, grinding wheel water tank.
This way, you will have a clear idea of where to start the quality check on the glass edger before purchasing. The standard quality requirements require that the front and rear beams must be flat, and must be resistant to wear, heat and oxidation so that the glass edger will not deform when operating at high temperatures. Moreover, the base, as the load-bearing position of the glass edging machine, also needs to have the same performance as the front and rear beams to ensure the quality of the glass edging. At the same time, the edging machine has higher requirements on the grinding head, and the quality of the grinding head directly affects the quality of glass after deep processing.
Glass edging machine
From years of maintenance experience, it is necessary to pay special attention to all the parts of the glass edging machine, especially the parts with high wear resistance and oxygen resistance requirements, which need to be castings, welding parts need to be particularly stiff, in order to make the edging machine in the long-term use of no major failure, no parts separation, loosening and so on.
Finally, you need to pay special attention to the motor. Motor shaft runout precision is high, waterproof ability is strong, can better ensure the quality of glass deep processing. The thickness of the grinding disc of the glass edging machine and the quality of the motor are all constraints. The cost of thick grinding plate is much higher than thin plate, so pay attention to inspection. It is recommended to buy copper wire motor, better bearing, high waterproof performance.