As a necessary machinery for glass deep processing, glass edging machine is relatively large in appearance, so the price of glass edging machine is relatively high. The price on the market is much the same, but because of last year's glass off-season is not weak market, so that the glass edger has been further developed.
Now, to share with you about the selection of edging machine details, should start from where to observe and review the quality of the edging machine is reliable.
First of all, let's review the basic structure of the edging machine. The main engine, the guide rail at the inlet and outlet end, the glass support frame and the ground water tank are the basic parts. And the main engine can be divided into the front beam, rear beam, base, column, motor, electric box, grinding water tank.
In this way, it can be very clear how to start the quality inspection of second-hand edging machine before purchase. According to the standard quality requirements, the front and back girders must be smooth, and need to have the performance of wear and heat resistance and oxidation resistance, so that the second-hand edger will not be deformed in the high temperature working process. In addition, the base, as the bearing place of the edging machine, also needs to have the same performance as the front and back girders to ensure the quality of glass edging. At the same time, the second-hand edging machine has higher requirements on the grinding head, the quality of the grinding head directly affects the quality of the glass after deep processing.
After years of maintenance and maintenance experience, it is necessary to pay special attention to the various parts in the purchase of second-hand edging machine, especially the parts with very high wear-resisting and anti-oxygen performance need to be cast parts, welding parts need to be particularly good, in order to make the second-hand edging machine in the long-term use of no major failures, no parts separation, loose and so on.
Finally, we need to pay special attention to the motor. The motor with high shaft runout precision and strong waterproof ability can ensure the quality of glass deep processing. The thickness of the motor grinding plate and the quality of the motor itself belong to the binding effect. The cost of thick grinding plate is much higher than that of thin plate, so it needs to pay attention to check. It is recommended to choose the motor made of copper wire, and the bearing is better waterproof performance.